Not all floors look the same. The reason is based on customer preference and budget. We can give you a matte finish or high gloss, slick or with non-skid, low, med, high, full chips, remove old coatings, fill cracks, holes, etc we do it all. We use industrial strength solvent based epoxies (not hardware store brands). They cost us a little more, but in the long run they are more durable. They do not chip and peel off. They will last you as long as you own your home if you take care of it. A good floor must start with surface preparation. For more information give us a call.


Set 15. This floor had an extreme case of efflorecence (white chalk) coming up through the floor, cracks, deep holes and a moisture problem. We prepped the floor and applied a vapor barrier, filled the holes and cracks and applied epoxy, chips and a topcoat (matte finish).
       
Set 14. Epoxy chips med-heavy broadcast. 2 coat clear epoxy. Repair drywall, tape & bed (repair not redo), texture and repaint - Before
       
       
After
       
     
Set 13. Epoxy chips heavy broadcast. 1 coat clear.
       
Set 12. Epoxy chips heavy broadcast /w urethane clear.
       
Set 11. Epoxy chips full broadcast sanded /w urethane clear.
       
Set 10. Sprayed Acrylic Concrete Sealer.
       
Set 9. Repair large cracks/full broadcast
       
Set 8. Remove old paint/Harley logo
       
Set 7: Grind and repair. Urethane topcoat.
     

   

Set 6:
     

Set 5:
       

Set 4: Epoxy and Clear Epoxy
     

Set 3:
 

Set 2: Urethane topcoat.
     

Set 1: Bucs Logo
 

Dallas-FT. Worth, Texas
(214) 432-0760
(214) 613-9082 Fax

Email: Customer Information


FREE ESTIMATES -
PRICED COMPETITIVELY – WARRANTY